BMRZG - AEROSOL SPRAY PAINT, 0556 FLAT BLACK

  • MSDS: BMRZG
  • Manufacturer: ZYNOLYTE PRODUCTS CO
  • Product Name: AEROSOL SPRAY PAINT, 0556 FLAT BLACK
  • National Stock Number: 8010-00N027615
Product Identification

Product ID:AEROSOL SPRAY PAINT, 0556 FLAT BLACK
MSDS Date:03/23/1988
FSC:8010
NIIN:00N027615
MSDS Number: BMRZG

Responsible Party
ZYNOLYTE PRODUCTS CO
2320 E DOMINGUEZ ST
CARSON, CA 90749
US

Emergency Phone: 310-513-0700

Info Phone: 310-513-0700

Cage: 25461

Contractor
ZYNOLYTE PRODUCTS CO
6244 CARSON, CA 90749 US

Telephone: 310-513-0700

Cage: 25461

Ingredients

400 @ 20C

CAS: 75-09-2

RTECS: PA8050000

OSHA PEL 500 PPM;1000 PPM, C

ACGIH TLV: 50 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


NON HAZARDOUS (POLYMER) INGREDIENT


COBALT OCTOATE

Fraction By Weight: 6%

OSHA PEL 0.05 MG/M3 (CO)

ACGIH TLV: 0.05 MG/M3 (CO)


PROPANE

CAS: 74-98-6

RTECS: TX2275000

OSHA PEL 1000 PPM

ACGIH TLV: SIMPLE ASPHYXIANT


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3


HYDROTREATED HEAVY NAPHTHA (HEAVY NAPHTHA)

CAS: 64742-48-9

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC)

CAS: 14807-96-6

RTECS: MW2710000

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST


PROPANE, 2-METHYL-; (ISOBUTANE)

CAS: 75-28-5

RTECS: TZ4300000


2 @ 20C

CAS: 64742-88-7

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM


NAPHTHA, LIGHT ALIPHATIC (PETROLEUM) (THIS MATERIAL

CAS: 64742-89-8

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST: GI DISTRESS. INHAL: OVEREXP
MAY CAUSE NOSE & THROAT IRRIT. MAY CAUSE CNS SYS EFTS SUCH AS DIZZ,
HDCH, NAUS, STAGGERING GAIT, CONFUSION & UNCON. REPORTS HAVE ASSOC
RPTD & PRLNG OVEREXP TO SOLV W/PERM BRAIN & NERV SYS DMG. EYE
WATERING, HDCH, NAUSE, DIZZ, & LOSS OF COORD ARE SIGNS THAT SOLV
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:METHYLENE CHLORIDE: GROUP 2B (IARC),
GROUP 2 (NTP)
Effects of Overexposure:HLTH HAZ: LEVELS ARE TOO HIGH. SKIN/EYE: MAY
CAUSE EYE IRRIT/BURNING OF EYES. RPTD/PRLNGD LIQ CNTCT MAY CAUSE
SKIN IRRIT W/DISCOMFORT & DERM. CHLOROCARBON MATLS HAVE PRODUCED
SENSIT OF THE MYOCARDIUM TO EPINEPHRINE IN LAB ANIMALS & COULD
HAVE SIMILAR EFT IN HUMANS. ADRENOMIMETICS (E.G. EPINEPHRINE) MAY
BE (SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST: CALL A PHYSICIAN IMMED AND HAVE NAMES OF INGRED
AVAIL. DO NOT INDUCE VOMIT. INHAL: REMOVE TO FRESH AIR. IF NOT
BRTHG, GIVE ARTF RESP, PREFERABLY MOUTH TO MOUTH. IF BRTHG
DIFFICULTY PERSISTS, OR OCCURS LATER, CONSULT A PHYSICIAN. EYE:
IMMED FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN; CALL A
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. IF IRRIT OCCURS,
CONTACT A PHYSICIAN.

Fire Fighting

Flash Point Method:CC
Flash Point:<20F,<-7C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD PRESS DEMAND SCBA & FULL
PROT EQUIP. H*2O MAY BE INEFTIVE. H*2O FROM FOG NOZZ MAY BE USED TO
COOL CLSD CNTNRS TO PVNT PRESS BUILDUP.
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESS. KEEP @ ROOM TEMP AS
EXPOS TO SUNLIGHT/OTHER HEAT MAY CAUSE CAN TO BURST, PROPELLING
CONTENTS ACROSS AREA. THERMAL DECOMP PROD (SUPP DATA)

Accidental Release

Spill Release Procedures:VENTILATE AREA. REMOVE SOURCES OF IGNITION.
PREVENT SKIN CONTACT AND BREATHING OF VAPOR. CONFINE AND REMOVE
WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:OBSERVE LABEL PRECAUTIONS. KEEP AWAY
FROM HEAT, SPARKS AND FLAME. DO NOT STORE ABOVE 120F. DO NOT EXPOSE
TO DIRECT SUNLIGHT TO AVOID BURSTING.
Other Precautions:DO NOT SAND/FLAME CUT/BRAZE/WELD DRY COATING WITHOUT
NIOSH/MSHA APPRVD RESP/APPROP VENT. DO NOT PUNCTURE. DO NOT SPRAY
NEAR FIRE/OPEN FLAME. NO SMOKING IN AREA OF USE. DO NOT USE IN GEN
VICIN OF ARC W ELDING, OPEN FLAMES/HOT (SUPP DATA)

Exposure Controls

Respiratory Protection:DO NOT BREATHE VAPS/MISTS. WEAR AN APPROPRIATE
PROPERLY FITTED NIOSH/MSHA APPROVED RESPIRATOR DURING & AFTER
APPLICATION UNLESS AIR MONITORING DEMONSTRATES VAPOR/MIST LEVELS
ARE BELOW APPLIC LIMIS. FO LLOW MFR'S DIRECTIONS FOR RESP USE.
Ventilation:PROVIDE SUFFICIENT VENTILATION IN VOLUME AND PATTERN TO
KEEP CONTAMINANT BELOW APPLICABLE OSHA REQUIREMENTS.
Protective Gloves:NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CREAMS MAY BE USED FOR EASE OF
CLEAN-UP, NOT FOR PROTECTION. COVERALLS.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING AND SMOKING.
Supplemental Safety and Health
SOL IN H*2O:MODERATE- APPRECIABLE, DEPENDING ON COLOR. EXPLO HAZ: MAY
INCL HCL & PHOSGENE . EFTS OF OVEREXP:CONTRAINDICATED EXCEPT FOR
LIFE-SUSTAINING USES IN HUMANS ACUTELY /CHRONICALLY EXPOSED TO
CHLOROCARBONS OTHER PREC:SURFS. HEAT &/OR UV RADIA MAY CAUSE THE
FORMATION OF HCL &/OR PHOSGENE .

Chemical Properties

HCC:V3
Boiling Pt:B.P. Text:<0F,<-18C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Evaporation Rate & Reference:FASTER THAN ETHER
Solubility in Water:SUPP DATA
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:92

Stability

Stability Indicator/Materials to Avoid:YES
NONE REASONABLY FORESEEABLE.
Stability Condition to Avoid:DO NOT STORE ABOVE 120 F.
Hazardous Decomposition Products:CO, CO*2, SMOKE, OXIDES OF HEAVY
METALS REPORTED IN INGRED SECTION. HCL, PHOSGENE .

Disposal

Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND
WATER SYSTEMS. INCINERATE ABSORBED MATERIAL IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REQUIREMENTS. DO NOT INCINERATE IN CLOSED
CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.